ASHCI

4 posts

Azure Stack HCI/Storage Spaces Direct: Optimal Network Configuration

There are many ways one can go about setting up the networking for an Azure Stack HCI (ASHCI)/Storage Spaces Direct (S2D) hyper-converged infrastructure (HCI) cluster. TL;DR Our rule of thumb is to start with four 25GbE ports via two network adapters for multiple nodes requiring switches or even in smaller […]

Custom Build S2D: The Elusive SlimSAS 8x (SFF-8654) Cable

Server and workstation boards have had SlimSAS 8x connectors for dual NVMe drive setups for quite a long time now. ASRock Rack EPC621D6U-2T16R (BTO Board) The SlimSAS SFF-8654 connector is to the right of the PCIe x16 slot. When they started appearing on server and workstation boards, we began trying […]

PowerShell Guides Update: Added New-VM SecureBoot Linux & Updated Others

We took some time today to add the following PowerShell Guide to our repository: New-VM Template: Gen2 SecureBoot Linux We ran into a snag installing the latest Ubuntu Server software with the .ISO refusing to boot unless we turned SecureBoot off. As it turns out, thanks to a pointer from […]

Data Centre SSDs: No Power Loss Protection (PLP) Means No S2D Deployments

Reading this article on Serve The Home this morning: Kingston DC450R SSD Released SATA and 3.84TB Maximum. The Kingston DC450R SSD is being released with “Data Center Series” on the sticker. But, it does not have power loss protection (PLP) so how could this be? The suspicion here is that […]