Storage

5 posts

Server/NAS Recipe for Storage Spaces or FreeNAS Veeam Backup Storage

The following is a recipe that we’d look at using for a backup destination for Veeam. Our current preference is for Storage Spaces set up for the requested 64KB Allocation Size but we’re looking into Linux Harden Repositories as an option. FreeNAS Operating System Ubuntu Server Distro Silverstone CS381 Chassis […]

Custom Build S2D: The Elusive SlimSAS 8x (SFF-8654) Cable

Server and workstation boards have had SlimSAS 8x connectors for dual NVMe drive setups for quite a long time now. ASRock Rack EPC621D6U-2T16R (BTO Board) The SlimSAS SFF-8654 connector is to the right of the PCIe x16 slot. When they started appearing on server and workstation boards, we began trying […]

S2D ASHCI: Extend the Cluster Performance History Cluster Disk

This process may be needed as the cluster grows due to the Health Service creating a somewhat small disk to start with. The following PowerShell will expand the Cluster Performance History Cluster Disk as the initial configured size may not be enough down the road. Variables to change: $VDNewSize = […]

SSDs and Endurance

We have been using Intel SATA SSDs in server settings for a very long time now. We have yet to hit one server, all virtualization platforms, exhaust any of the SSDs we’ve deployed. We’ve also been deploying HGST SAS SSDs in production for a very long time now. Same story, […]

Data Centre SSDs: No Power Loss Protection (PLP) Means No S2D Deployments

Reading this article on Serve The Home this morning: Kingston DC450R SSD Released SATA and 3.84TB Maximum. The Kingston DC450R SSD is being released with “Data Center Series” on the sticker. But, it does not have power loss protection (PLP) so how could this be? The suspicion here is that […]